Total Survivalist Blog: Search results for project ar
This is where it all started. A
Remington 870 Police Magnum
wearing express furniture. Best I can tell this gun pulled Cruiser duty for the Kentucky state Police, was sold probably through Bud K then ended up in the Desert. That is where it ended up being saved from a life of neglect and generally not being owned by yours truly.
I was pretty annoyed with the guy that day. Drive for a ways to meet him and it turns out he was not entirely honest about the guns condition. Ended up leaving with the gun and a couple more 20’s than I planned. A combination of cruiser duty and lack of maintenance in that guys care left the finish in terrible shape. It looks just fine at 15 feet but up close you can see significant discoloration and oxidization. The gun will almost surely rust if not slathered in oil. So after test firing it I kept the gun slathered in oil for awhile.
I thought about getting it professionally Keracoted or something. However the cost of that PLUS what I wanted to do to the gun was slightly prohibitive. Just more than I wanted to spend.
Once I got down here I wanted to get this project done so it could be our home defense long gun. The reason for that is largely legal in nature. Guns are common all over the South and non hippie parts of the West. However in particular shotguns are very common in Louisiana. The combination of duck hunting as well as short engagement ranges due to line of site for all game make them particularly handy guns down here. If I have to shoot somebody I would prefer to do it with a gun that is the same or very similar to ones in the prosecutor, judge and juries safe/ cabinet/ closet.
While I prefer an AR of the M4 flavor for close up work this advantage to the shotgun is considerable. Also while I like the M4 better a short barreled pump shotgun is amply capable of any home defense long gun task. There is the added benefit that if something happens I am, at least temporarily, losing a shotgun package worth $500 not an AR that all said and done I probably have 2k into.
Another consideration is that I am far more willing to carry said $500 shotgun as a “truck gun” than a semi automatic rifle. Even if it’s an AR/ AK/ FAL you got a great deal on back when those were available it is still important to consider replacement cost. The pump gun is about the bar of value I am willing to risk potential theft of on a trip during normal times.
So my philosophy of use for this project is a home defense shotgun that can also serve as a ‘truck gun’. I want to use quality components and do it right but budget is a consideration. First
as Alexander Wolfe noted if you get much above the $600 range you are pushing hard on decent entry level AR-15’s
. Of course those would need ancillary gear like a sling, mags and lights too so upping it to $800 is probably more realistic.
Depending on your budget it is entirely possible to make a $2,500+ fighting shotgun. We are a consumerist society and there is nothing wrong with that. However as
American Mercenary noted you can pay Ferrari money for a Fiat in projects or gun builds
In my mind one of the biggest benefits of the pump shotgun is that they are realistically affordable for anybody but homeless drug addicts. I’m not saying everybody can afford to spend $300ish on a used Remington 870/ Mossberg 500 today but with a little planning and some saving they can afford one in a reasonable amount of time.
We could have a hearty discussion about the benefits of both Rem and Moss platforms. Both are very rugged. The plane Jane Mossberg 500’s and their off brand Maverick 88’s are cheaper than Remingtons so they offer more value. Then again you have a lot more parts and accessory support with the Remington. I’ll close this phase of the discussion by saying they are both fine. Pick one type and buy 10 of them.
As I got to dreaming/ window shopping for this project
. Alexander Wolfe does a great job on research and testing to find the best gear and setup for a particular gun. I like to take all that information and shamelessly steal it; just like for the
So anyway I wanted to get this done in 2014. Running the math if I did the finish myself it wouldn’t really cost that much money. Thankfully ‘H’ recommended Alumahyde II vs plain old spray paint. So
I figured out my plan
. Some money came in and I ordered the stuff. It showed up in a few days.
The biggest piece of this project was the refinishing for sure. Thankfully Brownells has a series of videos
, etc. After some reading it seems that preparation is at least as important as the spraying.
First I disassembled the gun. Since I was putting on a sling mount I had to take the stock off anyway so I just did it then instead of covering up the stock with tape and a plastic bag or something.
I cleaned the gun and degreased it. Since I’d been using the ‘wetter the better’ theory of gun maintenance that took some doing.
Next I used masking tape to cover up the parts I didn’t want to paint. No pics of this but I covered the trigger guard and the front sight as well as both ends of the barrel. Filled the receiver with used paper towels from the cleaning then taped them into place.
It was too cold to paint in the garage but since I had the place to myself there were options. It was also a happy accident that I had a bunch of scrap carpet lying around. Laid 2 big pieces down on the kitchen floor (the easiest to clean worst case) as a ground cloth. Brought in a lawn/ patio chair that already had a bit of paint on it from another project to lean the pieces on.
I did the sling mount so it would match.
Then I painted. Overall it went pretty well. The only real sad face was a run on the barrel I foolishly tried to wipe off with a paper towel. It smeared and was really unattractive.
I tried painting over it but that didn’t work. Ended up just sanding that part down and repainting. That time went better. At least enough so that I decided not to try my luck messing with it anymore.
This brings us to a point of discussion. I simply was not in a hurry to put the amount of cash into this gun to get it professionally refinished. That meant doing it myself. Do it yourself projects well, have do it yourself results. I’d say the shotgun looks fine but you will not mistake it for being professionally finished. Honestly I am OK with this. After some deliberation on the matter I figured worst case if I hate the paint job I can get it redone professionally later or try again myself. The advantage of destroying a gun’s original finish (or getting one that is rough anyway) is that you can’t do it twice. Sort of like murder after the first one the rest are free.
I let the parts dry overnight then put it back together. In doing so I installed the GG&G sling mount and Elzetta light mount with a streamlight light I was using as my handheld tactical type light. Got to replace that now I guess.
After some consideration I decided to replace the old generic 5 shot neoprene shotshell holder with an Essetac card. Just pulled it off, slapped some velcro tape on and then a card on top. Not 100% how durable the velcro I got from the hardware store will be. Worst case I’ll order a bigger heavier duty piece later if needed.
When I went to put a card on the side of the receiver I noticed the standard 870 Express forend goes too far back onto the receiver for a card to fit. That led to
a Bleg on where to find another one
, the great American survivalist he is had a spare black plastic one lying around. He sent it my way along with a few other goodies gratis. So sometime in the near future I’ll be swapping that out and hopefully getting the sidesaddle card put on. I really want both because there is a decent chance if I grab this gun it’ll be 3am and I’ll be wearing running shorts so all the rounds I’ll have will be on the gun. Sure it sits by my cobbled together shotgun fighting load, which I will discuss in a future post but I might not have time for that so more rounds on the gun the better.
I took it out for a quick test fire to make sure it still goes bang. It still does. So now it is loaded up and in the
Sentry Safe Home Defender
with the Glock.
Pleased to say that
is finally done or at least within spitting distance of done after the forend swap and sidesaddle card installation. Total expenditure was roughly $500. Would like to get an SOE shotgun micro rig to go with it but am not in any particular hurry to do so. As I get a bit more experience with the different new pieces I may write about them individually.
Edited to include: I went to swap out the forend this afternoon. Before taking off the Essetac light mount, the extension and barrel I decided on a lark to lay the new plastic forend Zero sent me on top of the old one. They look identical in size. So now I’m looking at just taking a finish saw to the wood forend to cut it down. Worst case on that the 870 Express wood furniture is dirt cheap so if I ruin it that is fine. Thanks to Zero I’d have a functional forend for the duration. It’s either that or just buy a shorty plastic forend like the Magpul, Hogue or whatever. Do have a couple ebay auctions pending for dirty cheap 870P furniture but I’m not too optimistic about any of them. Going to sleep on it before doing anything I cannot take back. So finishing this project is slightly stalled. Story of my life.